Jackson Safety
Jackson Safety WF10 Minerall glass 25 pcs/box
(No reviews yet)
Write a Review
- SKU:
- P-JKSJ8356
Description
- Made of toughened mineral glass
- Two sizes 60x110mm and 90x110mm
- Wide range of DIN shades (9-12)
- PC magnifying lenses in wide range of diopters
- Special ADF adapter may be required
Related Products
Related Products
Jackson Safety WF10 Welding Passive Filter, 25 pcs/box
Jackson Safety
£27.33
Made of toughened mineral glass
Two sizes 60x110mm and 90x110mm
Wide range of DIN shades (9-12)
PC magnifying lenses in wide range of diopters
Special ADF adapter may be required
Jackson Safety Protractor 1 pc/box
Jackson Safety
£74.04
Locking lever to set and hold the tool at the desired angle
Equipped with a 5/8 inch by 10 inch tapered arm to complete findings of angles or desired bends, or to determine any portions of...
Jackson Safety Centering pin 1 pc/box
Jackson Safety
£4.50
Centering Pin
A hardened steel pin for use with the standard centering head. Suitable for marking,but should not be used as a center punch.
Jackson Safety #2 Adaptor standard 1 pc/box
Jackson Safety
£45.67
Designed for use with the #1 Contour Markers, the adapter simplifies handling and increases layout capacity. It permits use of all for sides of the Contour Marker and allows marking on small...
Jackson Safety #4 Marker jumbo 1 pc/box
Jackson Safety
£267.98
The Jackson Safety Jumbo Contour Marker (#4) is a timesaving tool used to lay out pipe and structural steel joints. Laterals at any angle, tees, wyes, crosses, elbows - any type or size of joint...